PRODUCTS / INDUSTRIAL HOSE / PETROLEUM HOSE / FUELMAN ANTISTATIC OIL & GAS LAYFLAT HOSE — EXTREME DUTY
APPLICATION
FUELMAN Antistatic Oil & Gas Layflat Hose — Extreme Duty
Extreme-duty version of the antistatic TPU layflat hose, for high-pressure fuel transfer and oilfield bypass duty. Positively buoyant in fresh and sea water, antistatic through dual longitudinal copper wire straps, in lengths to 600 ft. Meets MIL-PRF-370J; made under ISO 9001:2015.
The supplier publishes burst pressure only, and the figures in this table are its precalculated values. Maximum working pressure is 25% of the listed burst (a 4:1 safety factor) for hazardous or flammable liquids, and 50% (2:1) for non-hazardous, non-flammable liquids. Check that the end coupling is rated for the same pressure. Recommended operating pH range is 5 to 9.
Also available: the standard range (435–655 PSI burst, 1½″–12″) and Heavy Wall (850–900 PSI burst, 2″–6″).
CONSTRUCTION
Extrusion-through-weave layflat, extreme-duty wall
TUBE
Antistatic polyether-based thermoplastic polyurethane (TPU)
REINFORCEMENT
Circular woven high-tenacity polyester yarn, extruded through the weave
COVER
Abrasion and UV resistant TPU


SPECIFICATION
Sizes & ordering data
Part Number | ID | Working Pressure | Burst Pressure | Wall | Tensile | Weight | Coil Length | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| in | mm | PSI | bar | PSI | bar | in | mm | klbs | t | lb/ft | kg/m | ft | m | |
| PUFDS-400 | 4" | 102 | 625 | 43 | 2500 | 172 | 0.17 | 4.3 | 178 | 80.7 | 1.16 | 1.73 | 600 | 182.9 |
| PUFDS-500 | 5" | 127 | 625 | 43 | 2500 | 172 | 0.18 | 4.6 | 218 | 98.9 | 1.64 | 2.44 | 600 | 182.9 |
Burst pressure is measured on a straight, free-expanding hose to ISO 1402.
Part Number | Nominal ID (Display) | OD (Inches) | Working Pressure (PSI) | Burst Pressure (PSI) | Bend Radius (Inches) | Weight (lbs/ft) | Standard Coil Length (ft) | Vacuum (in.Hg) |
|---|---|---|---|---|---|---|---|---|
PUFDS-400 | 4" | 625 | 2500 | 1.16 | 600 | |||
PUFDS-500 | 5" | 625 | 2500 | 1.64 | 600 |
Part Number
ID
Working Pressure
Burst Pressure
Wall
Tensile
Weight
Coil Length