Tank Truck Suction & Discharge Hose 300 PSI

Oil suction and discharge hose for petroleum products, rated for full vacuum on the suction side of a tank-truck transfer.

CONSTRUCTION

Black smooth synthetic rubber, resistant to mineral oils and fuels with maximum 50% aromatic content

High tensile textile plies and helix wire embedded and antistatic wire

Black, smooth conductive rubber, abrasion, oil, fuel, ozone and weather resistant. Flame resistant according TRbF – 131 – Teil 2 - § 5.5

ID Range:

2" – 6" (51 mm – 152 mm)

Working Pressure:

300 PSI

Temp Range:

−22°F to +194°F (−30°C to +90°C)

Best For:

Loading and unloading petroleum road tankers; fuel and oil transfer

SPECIFICATION

Sizes & ordering data

Part Number	ID		OD		Working Pressure		Burst Pressure		Vacuum	Bend Radius		Weight		Coil Length
Part Number	in	mm	in	mm	PSI	bar	PSI	bar	in.Hg	in	mm	lb/ft	kg/m	ft	m
TTSH-200-300	2"	51	2.6	66	300	21	900	62	30	8	203	1.3	1.93	200	61
TTSH-300-300	3"	76	3.62	92	300	21	900	62	30	12	305	2.06	3.07	200	61
TTSH-400-300	4"	102	4.72	120	300	21	900	62	30	18	457	3.05	4.54	200	61
TTSH-600-300	6"	152	6.88	175	300	21	900	62	30	42	1067	5.95	8.85	100	30.5

Part Number	Nominal ID (Display)	OD (Inches)	Working Pressure (PSI)	Burst Pressure (PSI)	Bend Radius (Inches)	Weight (lbs/ft)	Standard Coil Length (ft)	Vacuum (in.Hg)
TTSH-200-300	2"	2.6	300	900	8	1.3	200	30
TTSH-300-300	3"	3.62	300	900	12	2.06	200	30
TTSH-400-300	4"	4.72	300	900	18	3.05	200	30
TTSH-600-300	6"	6.88	300	900	42	5.95	100	30

Hard-to-find specialty sizes sourced direct.