Single-Wire Pressure Washer Hose

One-wire braid pressure washer hose in ¼", ⅜" and ½" — 3,000 to 5,000 PSI by size

PARAGON Single-Wire Pressure Washer Hose — One-wire braid pressure washer hose in ¼", ⅜" and ½" — 3,000 to 5,000 PSI by size.

Tube: Synthetic black rubber tube. Reinforcement: One high tensile steel wire compact braid. Cover: Synthetic rubber black or gray outer cover.

Smaller OD and lower profile for tighter reels, high flex-impulse performance, lighter weight and a tight bend radius. Meets or exceeds SAE J517 EN 857 1SC and MSHA flame resistance designation IC-152/1. Supplied in 25 ft, 50 ft, 75 ft and 100 ft coils.

Hard-to-find specialty sizes sourced direct. Request a quote.

CONSTRUCTION

One high tensile steel wire compact braid

TUBE

Synthetic black rubber tube

REINFORCEMENT

One high tensile steel wire compact braid

COVER

Synthetic rubber black or gray outer cover

AT A GLANCE

ID Range:

¼" – ½" (6 mm – 13 mm)

Working Pressure:

3,000–5,000 PSI

Temp Range:

-40°F/+212°F (-40°C/+100°C); max operating +257°F (+125°C)

Best For:

High-pressure cleaning; oil, fuel, weather, ozone and abrasion resistant

Request a Quote

SPECIFICATION

Sizes & ordering data

Part Number	ID		OD		Working Pressure		Burst Pressure		Bend Radius		Coil Length
Part Number	in	mm	in	mm	PSI	bar	PSI	bar	in	mm	ft	m
PWB1-025-50'	¼"	6	0.48	12	5000	345	15000	1034	2	51	50	15.2
PWB1-0375-50'	3/8"	10	0.63	16	4000	276	12500	862	2.5	64	50	15.2
PWB1-050-50'	½"	13	0.75	19	3000	207	10000	689	3.5	89	50	15.2

Part Number	Nominal ID (Display)	OD (Inches)	Working Pressure (PSI)	Burst Pressure (PSI)	Bend Radius (Inches)	Standard Coil Length (ft)
PWB1-025-50'	¼"	0.48	5000	15000	2	50
PWB1-0375-50'	3/8"	0.63	4000	12500	2.5	50
PWB1-050-50'	½"	0.75	3000	10000	3.5	50

Download Spec Sheet

Ready to order?

Hard-to-find specialty sizes sourced direct.

Request a Quote