SAE 100R13 (EN 856) Hydraulic Hose

Hydraulic hose for systems with high peak pressures, built to SAE 100R13 and DIN EN 856. Flame resistant to the MSHA standard.

CONSTRUCTION

High quality oil resistant synthetic rubber compound

Four spiral high tensile steel wires up to 1″, six from 1¼″

Abrasion and weather resistant synthetic rubber

ID Range:

3/4" – 2" (19 mm – 51 mm)

Working Pressure:

5,075 PSI

Temp Range:

-40°F/+212°F (-40°C/+100°C)

Best For:

Hydraulic systems with high peak pressures; MSHA flame resistant

SPECIFICATION

Sizes & ordering data

Part Number	ID		OD		Working Pressure		Burst Pressure		Bend Radius		Weight		Coil Length
Part Number	in	mm	in	mm	PSI	bar	PSI	bar	in	mm	lb/ft	kg/m	ft	m
HR13-12	3/4"	19	1.3	33	5075	350	20300	1400	9.5	241	1.05	1.56	200	61
HR13-16	1"	25	1.56	40	5075	350	20300	1400	11.8	300	1.29	1.92	200	61
HR13-20	1 ¼"	32	2.02	51	5075	350	20300	1400	16.5	419	2.55	3.79	200	61
HR13-24	1 ½"	38	2.31	59	5075	350	20300	1400	19.7	500	3.2	4.76	200	61
HR13-32	2"	51	2.86	73	5075	350	20300	1400	25.2	640	4.53	6.74	200	61

Part Number	Nominal ID (Display)	OD (Inches)	Working Pressure (PSI)	Burst Pressure (PSI)	Bend Radius (Inches)	Weight (lbs/ft)	Standard Coil Length (ft)
HR13-12	3/4"	1.3	5075	20300	9.5	1.05	200
HR13-16	1"	1.56	5075	20300	11.8	1.29	200
HR13-20	1 ¼"	2.02	5075	20300	16.5	2.55	200
HR13-24	1 ½"	2.31	5075	20300	19.7	3.2	200
HR13-32	2"	2.86	5075	20300	25.2	4.53	200

Hard-to-find specialty sizes sourced direct.