top of page
APPLICATION
Flexible Choke & Kill Line
Flexible connection in choke and kill manifolds, carrying oil-gas mixtures that contain hydrogen sulfide (H2S) and other dangerous gases, and water-based, oil-based and foam kill fluids, under high pressure. Full bore; integral union or integral flange ends.
CONSTRUCTION
Stainless-steel-armoured choke and kill line with an HNBR or UPE tube
TUBE
HNBR/UPE
REINFORCEMENT
Multi-spiraled high tensile super flexible steel wire
COVER
High temperature and fire resistant synthetic rubber (resistant to 704°C open fire for 30 minutes), with a stainless steel armor protective layer


SPECIFICATION
Sizes & ordering data
ID | OD | Working Pressure | Proof Pressure | Burst Pressure | Bend Radius | Weight | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| in | mm | in | mm | PSI | bar | PSI | bar | PSI | bar | in | mm | lb/ft | kg/m |
| 2" | 51 | 3.5 | 89 | 5000 | 345 | 7500 | 517 | 11250 | 776 | 39.37 | 1000 | 6.42 | 9.55 |
| 3" | 76 | 4.53 | 115 | 5000 | 345 | 7500 | 517 | 11250 | 776 | 47.24 | 1200 | 10 | 14.88 |
| 3½" | 89 | 5.24 | 133 | 5000 | 345 | 7500 | 517 | 11250 | 776 | 55.12 | 1400 | 13.51 | 20.11 |
| 4" | 102 | 5.79 | 147 | 5000 | 345 | 7500 | 517 | 11250 | 776 | 62.99 | 1600 | 20.27 | 30.17 |
| 2" | 51 | 3.78 | 96 | 10000 | 689 | 15000 | 1034 | 22500 | 1551 | 47.24 | 1200 | 10.14 | 15.09 |
| 2½" | 64 | 4.96 | 126 | 10000 | 689 | 15000 | 1034 | 22500 | 1551 | 62.99 | 1600 | 16.89 | 25.14 |
| 3" | 76 | 5.51 | 140 | 10000 | 689 | 15000 | 1034 | 22500 | 1551 | 62.99 | 1600 | 22.3 | 33.19 |
| 4" | 102 | 6.57 | 167 | 10000 | 689 | 15000 | 1034 | 22500 | 1551 | 70.87 | 1800 | 35.14 | 52.3 |
| 2" | 51 | 3.98 | 101 | 15000 | 1034 | 22500 | 1551 | 33750 | 2327 | 55.12 | 1400 | 14.19 | 21.12 |
| 3" | 76 | 5.71 | 145 | 15000 | 1034 | 22500 | 1551 | 33750 | 2327 | 62.99 | 1600 | 27.7 | 41.22 |
| 4" | 102 | 7.01 | 178 | 15000 | 1034 | 22500 | 1551 | 33750 | 2327 | 78.74 | 2000 | 41.22 | 61.34 |
Pressure classes: 5,000, 10,000 and 15,000 PSI.
Part Number | Nominal ID (Display) | OD (Inches) | Working Pressure (PSI) | Burst Pressure (PSI) | Bend Radius (Inches) | Weight (lbs/ft) | Standard Coil Length (ft) | Vacuum (in.Hg) |
|---|---|---|---|---|---|---|---|---|
2" | 3.5 | 5000 | 11250 | 39.37 | 6.42 | |||
3" | 4.53 | 5000 | 11250 | 47.24 | 10 | |||
3½" | 5.24 | 5000 | 11250 | 55.12 | 13.51 | |||
4" | 5.79 | 5000 | 11250 | 62.99 | 20.27 | |||
2" | 3.78 | 10000 | 22500 | 47.24 | 10.14 | |||
2½" | 4.96 | 10000 | 22500 | 62.99 | 16.89 | |||
3" | 5.51 | 10000 | 22500 | 62.99 | 22.3 | |||
4" | 6.57 | 10000 | 22500 | 70.87 | 35.14 | |||
2" | 3.98 | 15000 | 33750 | 55.12 | 14.19 | |||
3" | 5.71 | 15000 | 33750 | 62.99 | 27.7 | |||
4" | 7.01 | 15000 | 33750 | 78.74 | 41.22 |
bottom of page
ID
OD
Working Pressure
Burst Pressure
Bend Radius
Weight