EPDM Steam Hose

Mandrel-built steam hose for saturated steam up to 232 °C / 18 bar, with peaks of superheated steam to the same limit, and for hot water up to 120 °C. Meets EN ISO 6134:2017 Type 2, Class A (BS 5342 Type 2A).

CONSTRUCTION

Mandrel-built steam hose with high-tensile braided wire

TUBE

Black smooth rubber, heat and steam resistant, developed to resist cracking and hardening

REINFORCEMENT

High tensile braided wire

COVER

Red smooth rubber, abrasion, ozone and weather resistant. Pin-pricked to evacuate gases. Fabric impression

AT A GLANCE

ID Range:

¾" – 4" (19 mm – 102 mm)

Working Pressure:

270 PSI (saturated steam)

Temp Range:

Steam +450°F / hot water +248°F

Best For:

Saturated steam to 232 °C and hot water to 120 °C

Request a Quote

SPECIFICATION

Sizes & ordering data

Part Number	ID		OD		Working Pressure		Weight		Coil Length
Part Number	in	mm	in	mm	PSI	bar	lb/ft	kg/m	ft	m
SWR-075-270	¾"	19	1.22	31	270	19	0.49	0.73	200	61
SWR-100-270	1"	25	1.45	37	270	19	0.61	0.91	200	61
SWR-125-270	1¼"	32	1.81	46	270	19	0.89	1.32	200	61
SWR-150-270	1½"	38	2.04	52	270	19	1.05	1.56	200	61
SWR-200-270	2"	51	2.59	66	270	19	1.51	2.25	200	61
SWR-250-270	2½"	64	3.18	81	270	19	2.27	3.38	200	61
SWR-300-270	3"	76	3.77	96	270	19	3.06	4.55	200	61
SWR-400-270	4"	102	4.88	124	270	19	4.7	6.99	200	61

Saturated steam: −31 °F to +450 °F (−35 °C to +232 °C). Hot water: up to +248 °F (+120 °C).

Safety factor: steam 10:1, hot water 3.15:1.

Part Number	Nominal ID (Display)	OD (Inches)	Working Pressure (PSI)	Weight (lbs/ft)	Standard Coil Length (ft)
SWR-075-270	¾"	1.22	270	0.49	200
SWR-100-270	1"	1.45	270	0.61	200
SWR-125-270	1¼"	1.81	270	0.89	200
SWR-150-270	1½"	2.04	270	1.05	200
SWR-200-270	2"	2.59	270	1.51	200
SWR-250-270	2½"	3.18	270	2.27	200
SWR-300-270	3"	3.77	270	3.06	200
SWR-400-270	4"	4.88	270	4.7	200

Download Spec Sheet

Ready to order?

Hard-to-find specialty sizes sourced direct.

Request a Quote