Agricultural TPU Lay Flat Drag Hose

PARAGON Agricultural TPU Lay Flat Drag Hose — Umbilical drag hose for slurry and manure distribution — 3½" to 8", 660 ft coils.

Tube: TPU (thermoplastic polyurethane) lining. Reinforcement: Heavily reinforced high-tenacity filament polyester weave. Cover: TPU, high puncture and UV resistance.

Working pressure: the supplier publishes a burst pressure only for this hose and states no safety factor, so no working pressure is quoted here. Ask us to confirm the working pressure for your duty before specifying it.

Hard-to-find specialty sizes sourced direct. Request a quote.

CONSTRUCTION

Heavy-weave drag build, low kink radius

TUBE

TPU (thermoplastic polyurethane) lining

REINFORCEMENT

Heavily reinforced high-tenacity filament polyester weave

COVER

TPU, high puncture and UV resistance

AT A GLANCE

ID Range:

3½" – 8" (89 mm – 203 mm)

Working Pressure:

Temp Range:

-58°F/+167°F (-50°C /+75°C)

Best For:

Umbilical slurry and manure systems dragged across field surfaces

Request a Quote

SPECIFICATION

Sizes & ordering data

Part Number	ID		Burst Pressure		Wall		Tensile		Weight		Coil Length
Part Number	in	mm	PSI	bar	in	mm	klbs	t	lb/ft	kg/m	ft	m
ADRG-350	3½"	89	650	45	0.14	3.6	28.7	13	0.7	1.04	660	201.2
ADRG-400	4"	102	610	42	0.14	3.6	32.9	14.9	0.91	1.35	660	201.2
ADRG-450	4½"	114	520	36	0.14	3.6	37.5	17	1.01	1.5	660	201.2
ADRG-500	5"	127	460	32	0.14	3.6	43.9	19.9	1.11	1.65	660	201.2
ADRG-550	5½"	140	435	30	0.15	3.8	48.3	21.9	1.29	1.92	660	201.2
ADRG-600	6"	152	405	28	0.15	3.8	56.4	25.6	1.41	2.1	660	201.2
ADRG-800	8"	203	435	30	0.17	4.3	102.8	46.6	2.21	3.29	660	201.2

Part Number	Nominal ID (Display)	Burst Pressure (PSI)	Weight (lbs/ft)	Standard Coil Length (ft)
ADRG-350	3½"	650	0.7	660
ADRG-400	4"	610	0.91	660
ADRG-450	4½"	520	1.01	660
ADRG-500	5"	460	1.11	660
ADRG-550	5½"	435	1.29	660
ADRG-600	6"	405	1.41	660
ADRG-800	8"	435	2.21	660

Download Spec Sheet

Ready to order?

Hard-to-find specialty sizes sourced direct.

Request a Quote